MOT Results

Honest John Classics MOT Results » MINI » Moke
Selling your classic car? It's FREE to list your car on Honest John Classics | No thanks

MINI Moke MOT Results

70.9% pass rate
from 55 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the MINI Moke is unusually good or bad.

  • 11% fail on Noise, emissions and leaks
    • 11% fail on Exhaust emissions
      • 11% fail on Spark ignition (200% worse than other pre-1990 cars)
        • 9.1% fail on Non catalyst emissions
        • 3.6% fail on Emissions not tested (8 times worse than other pre-1990 cars)
  • 9.1% fail on Brakes
    • 7.3% fail on Brake performance
      • 5.5% fail on Service brake performance
        • 5.5% fail on Rbt
          • 5.5% fail on Service brake performance
          • 1.8% fail on Service brake imbalance
      • 3.6% fail on Service Brake Efficiency (sp)
        • 3.6% fail on Rbt (sp)
          • 1.8% fail on Service brake performance
          • 1.8% fail on Service brake imbalance
      • 3.6% fail on Parking brake performance
        • 3.6% fail on Rbt
          • 3.6% fail on Parking brake performance
      • 3.6% fail on Parking brake efficiency (sp)
        • 3.6% fail on Rbt (sp)
    • 1.8% fail on Hydraulic systems
      • 1.8% fail on Reservoirs
    • 1.8% fail on Flexible brake hoses
  • 5.5% fail on Steering
    • 3.6% fail on Steering play (18 times worse than other pre-1990 cars)
      • 3.6% fail on Steering rack (41 times worse than other pre-1990 cars)
    • 1.8% fail on Steering gear
      • 1.8% fail on Steering rack
  • 5.5% fail on Lamps, reflectors and electrical equipment
    • 1.8% fail on Headlamp aim
      • 1.8% fail on Headlamp aim
    • 1.8% fail on Direction indicators
      • 1.8% fail on Flashing type
        • 1.8% fail on Side repeaters
    • 1.8% fail on Registration plate lamp(s)
    • 1.8% fail on Rear reflectors
  • 5.5% fail on Suspension
    • 3.6% fail on Wheel bearings
    • 1.8% fail on Suspension arms
      • 1.8% fail on Ball joint
    • 1.8% fail on Sub-frames
      • 1.8% fail on Sub-frame mounting prescribed areas
    • 1.8% fail on Component mounting prescribed areas
  • 5.5% fail on Body, chassis, structure
    • 3.6% fail on Transmission
      • 3.6% fail on Drive shafts
        • 3.6% fail on Joints
    • 1.8% fail on Exhaust system
  • 1.8% fail on Visibility
    • 1.8% fail on Washers
  • 1.8% fail on Seat belts and supplementary restraint systems
    • 1.8% fail on Seat belts
      • 1.8% fail on Prescribed areas
Read the Honest John Review