General maintainance - Can Answer This?
When starting from cold my engine management light has started staying illuminated, then it goes out again after a minute or so. Any ideas what needs replacing or attention?
Asked on 3 February 2013 by Alan69b12
Answered by
Alan Ross
Well it is indicating that a fault exists, most likely one of the many sensors that you have fitted.
Unless you have the expertise and necessary equipment it might be prudent to have a diagnostic check carried out (cost around £50-£70).
This should then identify the problem area with a fault code i.e P ---- 4 numbers.
Although it costs to have the check, it is sometimes better than having items changed in the hope that it may be right.
Unless you have the expertise and necessary equipment it might be prudent to have a diagnostic check carried out (cost around £50-£70).
This should then identify the problem area with a fault code i.e P ---- 4 numbers.
Although it costs to have the check, it is sometimes better than having items changed in the hope that it may be right.
Tags:
technical issues
ecu
Looking for a garage you can trust? Honest John's Good Garage Guide has thousands of reader recommended garages, plus how-to guides and tips on servicing.
The Good Garage GuideSimilar questions
Do you have any advice as to why my Citroen Xsara 1.4 petrol won’t rev properly? I’ve changed the throttle body and added fuel treatment. It runs and drives but it just won’t give a full rev as if it’s...
Do you have to reset the ECU after cleaning the Mass Air Flow sensor?
The DPF on my 2010 Ford Mondeo TDCi burnt out, glowed red, smoked and then the exhaust dropped after 109,000 miles. No warning lights came up on dash. Can I just replace the DPF or do I need to sort out...
.jpg)
