Do you want the Road Tax system to change? Do you have thoughts on the potential changes to the Road Tax system? | No thanks
SAAB 96 MOT Results
75.1% pass rate
from 261 tests in 2017
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the SAAB 96 is unusually good or bad.
-
14% fail on
Lamps, Reflectors and Electrical Equipment
-
5.0% fail on
Headlamps
- 4.6% fail on Headlamp
-
0.38% fail on
Headlamp defects which don't require an aim check on retest
- 0.38% fail on Main beam 'tell-tale'
- 4.2% fail on Registration plate lamp
-
3.8% fail on
Position lamps
- 3.1% fail on Front lamps
- 0.77% fail on Rear lamps
- 3.8% fail on Stop lamp
- 3.4% fail on Headlamp aim
-
2.7% fail on
Direction indicators
-
2.7% fail on
Flashing type
- 1.9% fail on Individual lamps
- 0.38% fail on All direction indicators
- 0.38% fail on Tell tales
- 0.38% fail on Switch
-
2.7% fail on
Flashing type
- 2.3% fail on Battery
- 2.3% fail on Horn
-
0.38% fail on
Rear fog lamp
- 0.38% fail on Fog lamp
- 0.38% fail on Tell tale
-
0.38% fail on
Hazard warning
- 0.38% fail on Lamp
- 0.38% fail on Headlamp aim not tested
-
5.0% fail on
Headlamps
-
10% fail on
Brakes
-
8.8% fail on
Brake performance
- 5.4% fail on Parking brake performance
- 4.6% fail on Front wheels
- 3.8% fail on Rear wheels
- 1.5% fail on Service brake performance
- 0.77% fail on Brake imbalance
-
1.5% fail on
Hydraulic systems
-
0.77% fail on
Components
- 0.77% fail on Hoses
- 0.38% fail on Brake fluid warning lamp
- 0.38% fail on Leaks
-
0.77% fail on
Components
-
1.1% fail on
Hub components
- 0.38% fail on Brake pads
- 0.38% fail on Brake calipers
- 0.38% fail on Wheel cylinder
-
0.38% fail on
Mechanical components
- 0.38% fail on Cable
-
8.8% fail on
Brake performance
-
9.6% fail on
Suspension
-
4.6% fail on
Prescribed areas
- 3.8% fail on Component mounting
- 1.1% fail on Spring mounting
- 2.3% fail on Front suspension joints
-
1.5% fail on
Wheel bearings
- 1.5% fail on Front
- 0.38% fail on Rear
-
1.1% fail on
Suspension arms
- 1.1% fail on Pins/bushes/ball joints
-
1.1% fail on
Drive shafts
-
1.1% fail on
Front drive shafts
- 1.1% fail on Constant velocity joints
-
1.1% fail on
Front drive shafts
-
0.38% fail on
Shock absorbers
- 0.38% fail on Condition
-
4.6% fail on
Prescribed areas
-
6.9% fail on
Driver's view of the road
- 6.1% fail on Washers
- 0.77% fail on Wipers
- 0.38% fail on Bonnet
-
5.7% fail on
Body, Structure and General Items
-
2.3% fail on
Doors
(3 times worse than other pre-1990 cars)
- 2.3% fail on Passengers front (7 times worse than other pre-1990 cars)
- 1.9% fail on Body condition
-
1.1% fail on
Vehicle structure
- 1.1% fail on Chassis
- 0.38% fail on Body security
-
0.38% fail on
Seats
- 0.38% fail on Drivers
-
2.3% fail on
Doors
(3 times worse than other pre-1990 cars)
-
4.2% fail on
Exhaust, Fuel and Emissions
- 2.7% fail on Exhaust system
- 1.1% fail on Emissions
- 0.38% fail on Emissions not tested
-
2.7% fail on
Steering
-
2.3% fail on
Steering system
- 1.5% fail on Steering rack
- 0.77% fail on Track rod end
- 0.77% fail on Steering operation
-
2.3% fail on
Steering system
-
2.3% fail on
Seat Belts and Supplementary Restraint Systems
-
2.3% fail on
Seat belts
- 1.9% fail on Prescribed areas
- 0.38% fail on Attachment
-
2.3% fail on
Seat belts
-
1.9% fail on
Tyres
- 1.1% fail on Condition
- 0.77% fail on Tread depth
-
0.38% fail on
Road Wheels
- 0.38% fail on Attachment
-
0.38% fail on
Registration plates and VIN
- 0.38% fail on Registration plate