MOT Results

Honest John Classics MOT Results » Rover » P6
Do you have a minute to answer an electric vehicle survey? Start the survey | No thanks

Rover P6 MOT Results

80.4% pass rate
from 209 tests in 2020
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the Rover P6 is unusually good or bad.

  • 8.6% fail on Brakes
    • 7.7% fail on Brake performance
      • 5.3% fail on Service brake performance
        • 5.3% fail on Rbt
          • 4.8% fail on Service brake performance
          • 0.48% fail on Service brake imbalance
      • 5.3% fail on Parking brake efficiency (sp)
        • 4.3% fail on Rbt (sp)
        • 0.96% fail on Decelerometer (sp)
      • 4.8% fail on Service Brake Efficiency (sp)
        • 4.8% fail on Rbt (sp)
          • 4.8% fail on Service brake imbalance (130% worse than other pre-1990 cars)
          • 1.9% fail on Service brake performance
      • 2.9% fail on Parking brake performance
        • 2.9% fail on Rbt
          • 1.4% fail on Parking brake performance
          • 1.4% fail on Parking (secondary brake performance)
      • 0.48% fail on Brake performance not tested
    • 0.96% fail on Mechanical brake components
      • 0.48% fail on Brake linings and pads
        • 0.48% fail on Brake pads
      • 0.48% fail on Brake discs and drums
        • 0.48% fail on Brake discs
    • 0.48% fail on Flexible brake hoses
    • 0.48% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.48% fail on Hydraulic brake callipers
  • 6.2% fail on Lamps, reflectors and electrical equipment (54% better than other pre-1990 cars)
    • 1.9% fail on Stop lamp
    • 1.4% fail on Headlamps
      • 1.4% fail on Headlamp
    • 1.4% fail on Position lamps
      • 1.4% fail on Position lamp
    • 0.96% fail on Headlamp aim
      • 0.96% fail on Headlamp aim
    • 0.96% fail on Electrical equipment
      • 0.96% fail on Horn
    • 0.48% fail on Direction indicators
      • 0.48% fail on Semaphore
        • 0.48% fail on Arm
  • 4.3% fail on Visibility
    • 4.3% fail on Washers
    • 0.48% fail on Wipers
  • 3.3% fail on Suspension (59% better than other pre-1990 cars)
    • 1.4% fail on Suspension arms
      • 1.4% fail on Ball joint dust cover
    • 1.4% fail on Component mounting prescribed areas
    • 0.96% fail on Other suspension component
      • 0.96% fail on Ball joint
  • 1.9% fail on Body, chassis, structure (72% better than other pre-1990 cars)
    • 0.96% fail on Integral vehicle structure
      • 0.96% fail on Integral vehicle structure condition
    • 0.48% fail on Chassis
      • 0.48% fail on Chassis condition
    • 0.48% fail on Doors
      • 0.48% fail on Driver's door
        • 0.48% fail on Door condition
  • 1.9% fail on Noise, emissions and leaks
    • 0.96% fail on Exhaust emissions
      • 0.96% fail on Spark ignition
        • 0.96% fail on Non catalyst emissions
    • 0.96% fail on Fluid leaks
      • 0.48% fail on Engine oil leaks
      • 0.48% fail on Hydraulic fluid leaks
  • 0.96% fail on Tyres
    • 0.96% fail on Condition
  • 0.48% fail on Seat belts and supplementary restraint systems
    • 0.48% fail on Seat belts
      • 0.48% fail on Condition