MOT Results

Honest John Classics MOT Results » Morris » 1000
Selling your classic car? It's FREE to list your car on Honest John Classics | No thanks

Morris 1000 MOT Results

66.7% pass rate
from 204 tests in 2017
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the Morris 1000 is unusually good or bad.

  • 19% fail on Brakes (64% worse than other pre-1990 cars)
    • 17% fail on Brake performance (100% worse than other pre-1990 cars)
      • 12% fail on Front wheels (2 times worse than other pre-1990 cars)
      • 6.4% fail on Rear wheels
      • 5.4% fail on Parking brake performance
      • 2.9% fail on Brake imbalance (3 times worse than other pre-1990 cars)
      • 2.5% fail on Service brake performance
      • 0.98% fail on Brake performance not tested
      • 0.49% fail on Brake operation
    • 4.4% fail on Hydraulic systems
      • 2.5% fail on Leaks (3 times worse than other pre-1990 cars)
      • 1.5% fail on Components
        • 0.98% fail on Hoses
        • 0.49% fail on Cylinders
      • 0.49% fail on Operation
    • 0.98% fail on Service brake control components
      • 0.98% fail on Pedal
        • 0.98% fail on Condition
  • 14% fail on Lamps, Reflectors and Electrical Equipment
    • 3.4% fail on Position lamps
      • 2.5% fail on Front lamps
      • 0.98% fail on Rear lamps
    • 3.4% fail on Registration plate lamp
    • 3.4% fail on Direction indicators
      • 3.4% fail on Flashing type
        • 2.0% fail on All direction indicators
        • 0.49% fail on Individual lamps
        • 0.49% fail on Tell tales
        • 0.49% fail on Switch
    • 3.4% fail on Headlamp aim
    • 2.5% fail on Stop lamp
    • 2.0% fail on Headlamps
      • 2.0% fail on Headlamp
      • 0.49% fail on Headlamp defects which don't require an aim check on retest
        • 0.49% fail on Main beam 'tell-tale'
    • 2.0% fail on Horn
  • 8.8% fail on Suspension
    • 7.4% fail on Prescribed areas
      • 3.9% fail on Component mounting
      • 3.4% fail on Spring mounting (2 times worse than other pre-1990 cars)
    • 0.98% fail on Leaf springs
      • 0.49% fail on Shackle bracket
      • 0.49% fail on Securing bolts
    • 0.98% fail on Suspension arms
      • 0.98% fail on Pins/bushes/ball joints
    • 0.98% fail on Wheel bearings
      • 0.98% fail on Front
    • 0.49% fail on Tie bars/rods
      • 0.49% fail on Condition
    • 0.49% fail on Shock absorbers
      • 0.49% fail on Condition
  • 3.9% fail on Steering
    • 3.9% fail on Steering system
      • 2.9% fail on Steering rack
      • 0.49% fail on Ball joint
      • 0.49% fail on Track rod end
      • 0.49% fail on Other components
        • 0.49% fail on Steering pivot point
  • 3.9% fail on Body, Structure and General Items
    • 2.0% fail on Body condition
    • 1.5% fail on Vehicle structure
      • 1.5% fail on Chassis
    • 0.98% fail on Seats
      • 0.49% fail on Passengers
      • 0.49% fail on Drivers
    • 0.49% fail on Engine mountings
    • 0.49% fail on Body security
  • 3.9% fail on Driver's view of the road
    • 3.4% fail on Washers
    • 0.98% fail on Wipers
  • 1.5% fail on Tyres
    • 0.98% fail on Condition
    • 0.49% fail on Tread depth
  • 0.98% fail on Exhaust, Fuel and Emissions (83% better than other pre-1990 cars)
    • 0.49% fail on Exhaust system
    • 0.49% fail on Fuel system
      • 0.49% fail on Hose
  • 0.98% fail on Registration plates and VIN
    • 0.98% fail on Registration plate