MOT Results

Honest John Classics MOT Results » Mitsubishi » Shogun
Selling your classic car? It's FREE to list your car on Honest John Classics | No thanks

Mitsubishi Shogun MOT Results

67.2% pass rate
from 64 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the Mitsubishi Shogun is unusually good or bad.

  • 11% fail on Brakes
    • 6.3% fail on Brake performance
      • 4.7% fail on Service Brake Efficiency (sp)
        • 4.7% fail on Rbt (sp)
          • 3.1% fail on Service brake performance
          • 1.6% fail on Service brake imbalance
      • 1.6% fail on Service brake performance
        • 1.6% fail on Rbt
          • 1.6% fail on Service brake performance
      • 1.6% fail on Brake performance not tested
    • 3.1% fail on Hydraulic systems (11 times worse than other pre-1990 cars)
      • 3.1% fail on Brake fluid (27 times worse than other pre-1990 cars)
    • 3.1% fail on Rigid brake pipes
    • 1.6% fail on Air and vacuum systems
      • 1.6% fail on Leaks
    • 1.6% fail on Flexible brake hoses
    • 1.6% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 1.6% fail on Hydraulic brake callipers
  • 11% fail on Lamps, reflectors and electrical equipment
    • 4.7% fail on Front and rear fog lamps
      • 4.7% fail on Rear fog lamp
        • 4.7% fail on Rear fog lamp
    • 3.1% fail on Headlamp aim
      • 3.1% fail on Headlamp aim
    • 1.6% fail on Direction indicators
      • 1.6% fail on Flashing type
        • 1.6% fail on All direction indicators
    • 1.6% fail on Registration plate lamp(s)
  • 9.4% fail on Suspension
    • 4.7% fail on Component mounting prescribed areas
    • 3.1% fail on Anti-roll bars
      • 1.6% fail on Anti-roll bar
      • 1.6% fail on Attachment bracket and mounting
      • 1.6% fail on Linkage pins and bushes
    • 1.6% fail on Wheel bearings
    • 1.6% fail on Sub-frames
      • 1.6% fail on Sub-frame mounting prescribed areas
  • 9.4% fail on Body, chassis, structure
    • 4.7% fail on Exhaust system
    • 3.1% fail on Chassis
      • 3.1% fail on Chassis condition
    • 1.6% fail on Integral vehicle structure
      • 1.6% fail on Integral vehicle structure condition
    • 1.6% fail on Transmission
      • 1.6% fail on Prop shafts
        • 1.6% fail on Joints
  • 4.7% fail on Steering
    • 3.1% fail on Steering linkage components
      • 1.6% fail on Ball joint
      • 1.6% fail on Track rod end
      • 1.6% fail on Locking devices
    • 1.6% fail on Power steering
      • 1.6% fail on Other components
  • 4.7% fail on Visibility
    • 3.1% fail on Wipers
    • 3.1% fail on Washers
  • 3.1% fail on Seat belts and supplementary restraint systems
    • 3.1% fail on Seat belts
      • 3.1% fail on Prescribed areas
  • 3.1% fail on Tyres
    • 1.6% fail on Condition
    • 1.6% fail on Tread depth
  • 1.6% fail on Noise, emissions and leaks
    • 1.6% fail on Fluid leaks
      • 1.6% fail on Engine oil leaks