MOT Results

Honest John Classics MOT Results » Ford » P100
Selling your classic car? It's FREE to list your car on Honest John Classics | No thanks

Ford P100 MOT Results

72.2% pass rate
from 133 tests in 2021
(36% better than other pre-1990 vans)
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 vans and highlighted areas where the Ford P100 is unusually good or bad.

  • 16% fail on Lamps, reflectors and electrical equipment
    • 9.8% fail on Stop lamp (170% worse than other pre-1990 vans)
    • 6.0% fail on Front and rear fog lamps
      • 6.0% fail on Rear fog lamp
        • 6.0% fail on Rear fog lamp
    • 3.0% fail on Electrical equipment
      • 2.3% fail on Horn
      • 0.75% fail on Electrical wiring
      • 0.75% fail on Battery(ies)
    • 2.3% fail on Headlamps
      • 2.3% fail on Headlamp
    • 2.3% fail on Direction indicators
      • 2.3% fail on Flashing type
        • 1.5% fail on Individual direction indicators
        • 0.75% fail on Side repeaters
    • 2.3% fail on Registration plate lamp(s)
    • 0.75% fail on Headlamp aim
      • 0.75% fail on Headlamp aim
    • 0.75% fail on Position lamps
      • 0.75% fail on Position lamp
    • 0.75% fail on Mandatory tell-tales
      • 0.75% fail on Rear fog lamp tell-tale
  • 14% fail on Suspension
    • 6.0% fail on Springs (2 times worse than other pre-1990 vans)
      • 3.8% fail on Leaf springs (16 times worse than other pre-1990 vans)
        • 1.5% fail on Leaf spring (30 times worse than other pre-1990 vans)
        • 0.75% fail on Anchor bracket
        • 0.75% fail on Shackle bracket
        • 0.75% fail on Shackle pins and bushes
      • 1.5% fail on Spring mounting prescribed areas
      • 0.75% fail on Coil springs
        • 0.75% fail on Coil spring
    • 4.5% fail on Suspension arms
      • 2.3% fail on Ball joint
      • 1.5% fail on Pins and bushes
      • 0.75% fail on Ball joint dust cover
    • 3.0% fail on Component mounting prescribed areas
    • 1.5% fail on Sub-frames
      • 0.75% fail on Pins and bushes
      • 0.75% fail on Sub-frame mounting prescribed areas
    • 0.75% fail on Wheel bearings
    • 0.75% fail on Suspension rods
      • 0.75% fail on Pins and bushes
  • 7.5% fail on Body, chassis, structure
    • 3.0% fail on Exhaust system
    • 2.3% fail on Chassis
      • 2.3% fail on Chassis condition
    • 1.5% fail on Integral vehicle structure
      • 1.5% fail on Integral vehicle structure condition
    • 1.5% fail on Body
      • 1.5% fail on Mounting fixings (41 times worse than other pre-1990 vans)
    • 0.75% fail on Seats
      • 0.75% fail on Driver's seat
  • 6.8% fail on Seat belts and supplementary restraint systems
    • 6.8% fail on Seat belts
      • 6.8% fail on Prescribed areas (200% worse than other pre-1990 vans)
      • 0.75% fail on Attachment
  • 5.3% fail on Brakes (65% better than other pre-1990 vans)
    • 3.8% fail on Brake performance (68% better than other pre-1990 vans)
      • 2.3% fail on Service brake performance
        • 2.3% fail on Rbt
          • 2.3% fail on Service brake performance
      • 1.5% fail on Service Brake Efficiency (sp)
        • 1.5% fail on Rbt (sp)
          • 0.75% fail on Service brake performance
          • 0.75% fail on Service brake imbalance
      • 0.75% fail on Parking brake performance
        • 0.75% fail on Decelerometer
          • 0.75% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
      • 0.75% fail on Parking brake efficiency (sp)
        • 0.75% fail on Rbt (sp)
    • 0.75% fail on Load sensing valves
    • 0.75% fail on Mechanical brake components
      • 0.75% fail on Brake discs and drums
        • 0.75% fail on Brake discs
  • 4.5% fail on Steering
    • 2.3% fail on Steering coupling (28 times worse than other pre-1990 vans)
      • 2.3% fail on Flexible coupling (41 times worse than other pre-1990 vans)
    • 1.5% fail on Steering gear
      • 1.5% fail on Steering rack
    • 1.5% fail on Steering linkage components
      • 1.5% fail on Ball joint (5 times worse than other pre-1990 vans)
    • 0.75% fail on Power steering
      • 0.75% fail on Pump
    • 0.75% fail on Steering wheel
    • 0.75% fail on Steering column
  • 3.8% fail on Visibility (67% better than other pre-1990 vans)
    • 3.0% fail on Washers
    • 1.5% fail on Wipers
  • 3.8% fail on Noise, emissions and leaks
    • 3.0% fail on Exhaust emissions
      • 2.3% fail on Spark ignition
        • 2.3% fail on Non catalyst emissions
      • 0.75% fail on Compression ignition
        • 0.75% fail on Emissions not tested
    • 0.75% fail on Fluid leaks
      • 0.75% fail on Engine oil leaks
  • 1.5% fail on Tyres
    • 1.5% fail on Condition
  • 0.75% fail on Road Wheels
    • 0.75% fail on Attachment