Selling your classic car? It's FREE to list your car on Honest John Classics | No thanks

Ferrari Dino MOT Results

86.6% pass rate
from 97 tests in 2020
(50% better than other pre-1990 cars)
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the Ferrari Dino is unusually good or bad.

  • 6.2% fail on Lamps, reflectors and electrical equipment
    • 3.1% fail on Headlamps
      • 3.1% fail on Headlamp
    • 1.0% fail on Position lamps
      • 1.0% fail on Position lamp
    • 1.0% fail on Stop lamp
    • 1.0% fail on Registration plate lamp(s)
    • 1.0% fail on Electrical equipment
      • 1.0% fail on Horn
  • 5.2% fail on Visibility
    • 3.1% fail on Wipers
    • 3.1% fail on Washers
  • 3.1% fail on Brakes
    • 3.1% fail on Brake performance
      • 1.0% fail on Service brake performance
        • 1.0% fail on Rbt
          • 1.0% fail on Service brake performance
          • 1.0% fail on Service brake imbalance
      • 1.0% fail on Parking brake performance
        • 1.0% fail on Rbt
          • 1.0% fail on Parking brake performance
      • 1.0% fail on Parking brake efficiency (sp)
        • 1.0% fail on Gradient tester (sp)
    • 1.0% fail on Rigid brake pipes
  • 3.1% fail on Noise, emissions and leaks
    • 3.1% fail on Exhaust emissions
      • 3.1% fail on Spark ignition
        • 3.1% fail on Non catalyst emissions
  • 1.0% fail on Identification of the vehicle
    • 1.0% fail on Registration plates
  • 1.0% fail on Steering
    • 1.0% fail on Steering linkage components
      • 1.0% fail on Ball joint
  • 1.0% fail on Suspension
    • 1.0% fail on Anti-roll bars
      • 1.0% fail on Linkage pins and bushes
    • 1.0% fail on Component mounting prescribed areas
  • 1.0% fail on Body, chassis, structure
    • 1.0% fail on Exhaust system
  • 1.0% fail on Speedometer and speed limiter
    • 1.0% fail on Speedometer