Selling your classic car? It's FREE to list your car on Honest John Classics | No thanks

Chevrolet Camaro MOT Results

79.9% pass rate
from 308 tests in 2017
(31% better than other pre-1990 cars)
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the Chevrolet Camaro is unusually good or bad.

  • 15% fail on Lamps, Reflectors and Electrical Equipment
    • 5.2% fail on Direction indicators
      • 5.2% fail on Flashing type
        • 2.9% fail on Individual lamps
        • 1.3% fail on Tell tales (3 times worse than other pre-1990 cars)
        • 0.97% fail on All direction indicators
        • 0.32% fail on Side repeaters
    • 4.9% fail on Headlamp aim
    • 4.5% fail on Position lamps
      • 3.9% fail on Front lamps
      • 1.6% fail on Rear lamps
    • 4.2% fail on Battery (2 times worse than other pre-1990 cars)
    • 3.2% fail on Headlamps
      • 2.9% fail on Headlamp
      • 0.32% fail on Headlamp defects which do require an aim check on retest
        • 0.32% fail on Main beam 'tell-tale'
    • 3.2% fail on Stop lamp
    • 2.3% fail on Registration plate lamp
    • 2.3% fail on Horn
    • 0.97% fail on Rear fog lamp
      • 0.97% fail on Fog lamp
      • 0.32% fail on Tell tale
    • 0.32% fail on Electrical wiring
  • 7.1% fail on Brakes
    • 4.9% fail on Brake performance
      • 3.6% fail on Parking brake performance
      • 1.9% fail on Front wheels
      • 1.9% fail on Rear wheels
      • 0.32% fail on Brake imbalance
    • 2.3% fail on Hydraulic systems
      • 2.3% fail on Components
        • 1.9% fail on Hoses
        • 0.32% fail on Pipes
    • 0.65% fail on Parking brake
      • 0.32% fail on Fitment
      • 0.32% fail on Condition
    • 0.32% fail on Service brake control components
      • 0.32% fail on Pedal
        • 0.32% fail on Condition
    • 0.32% fail on Mechanical components
      • 0.32% fail on Cable
    • 0.32% fail on Hub components
      • 0.32% fail on Brake discs
    • 0.32% fail on Prescribed areas
      • 0.32% fail on Park brake mechanism/associated mountings
  • 6.2% fail on Driver's view of the road
    • 5.5% fail on Washers
    • 1.6% fail on Wipers
  • 4.5% fail on Exhaust, Fuel and Emissions
    • 3.6% fail on Exhaust system
    • 1.3% fail on Emissions
    • 0.32% fail on Fuel system
      • 0.32% fail on Pipe
  • 3.9% fail on Suspension (60% better than other pre-1990 cars)
    • 1.3% fail on Anti-roll bars
      • 0.97% fail on Linkage pins/bushes/ball joints
      • 0.32% fail on Pins/bushes/ball joints
    • 0.97% fail on Suspension arms
      • 0.97% fail on Pins/bushes/ball joints
    • 0.97% fail on Prescribed areas (76% better than other pre-1990 cars)
      • 0.97% fail on Component mounting
    • 0.65% fail on Wheel bearings
      • 0.65% fail on Front
    • 0.32% fail on Leaf springs
      • 0.32% fail on Securing bolts
    • 0.32% fail on Front suspension joints
  • 2.9% fail on Steering
    • 1.6% fail on Steering system
      • 0.65% fail on Steering box
      • 0.65% fail on Drag link end
      • 0.32% fail on Ball joint
      • 0.32% fail on Steering arm
    • 0.97% fail on Power steering
      • 0.65% fail on Pipes and hoses (6 times worse than other pre-1990 cars)
      • 0.32% fail on Rams
    • 0.32% fail on Steering control
      • 0.32% fail on Steering wheel
  • 2.9% fail on Seat Belts and Supplementary Restraint Systems
    • 2.9% fail on Seat belts
      • 1.3% fail on Prescribed areas
      • 0.97% fail on Condition
      • 0.65% fail on Requirements
  • 1.3% fail on Tyres
    • 0.97% fail on Condition
    • 0.32% fail on Tread depth
  • 1.3% fail on Body, Structure and General Items
    • 0.65% fail on Seats
      • 0.65% fail on Drivers
      • 0.32% fail on Passengers
    • 0.32% fail on Body condition
    • 0.32% fail on Doors
      • 0.32% fail on Drivers
  • 0.32% fail on Registration plates and VIN
    • 0.32% fail on Registration plate