Do you have a minute to answer an electric vehicle survey? Start the survey | No thanks

BMW 2002 MOT Results

73.5% pass rate

from 151 tests in 2020

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the BMW 2002 is unusually good or bad.

14% fail on Lamps, reflectors and electrical equipment
- 4.6% fail on Headlamps
  - 4.6% fail on Headlamp
- 4.6% fail on Headlamp aim
  - 3.3% fail on Headlamp aim
  - 1.3% fail on Headlamp aim not tested
- 4.0% fail on Direction indicators
  - 4.0% fail on Flashing type
    - 2.6% fail on Individual direction indicators
    - 1.3% fail on All direction indicators
- 2.6% fail on Stop lamp
- 2.6% fail on Registration plate lamp(s)
- 2.0% fail on Electrical equipment
  - 2.0% fail on Horn
- 1.3% fail on Position lamps
  - 1.3% fail on Position lamp
9.9% fail on Brakes
- 6.6% fail on Brake performance
  - 4.0% fail on Service brake performance
    - 3.3% fail on Rbt
      - 3.3% fail on Service brake performance
      - 0.66% fail on Service brake imbalance
    - 0.66% fail on Decelerometer
      - 0.66% fail on Service brake performance
  - 2.0% fail on Service Brake Efficiency (sp)
    - 1.3% fail on Rbt (sp)
      - 1.3% fail on Service brake imbalance
    - 0.66% fail on Decelerometer (sp)
  - 1.3% fail on Parking brake efficiency (sp)
    - 1.3% fail on Rbt (sp)
  - 0.66% fail on Brake performance not tested
  - 0.66% fail on Parking brake performance
    - 0.66% fail on Rbt
      - 0.66% fail on Parking (secondary brake performance)
- 1.3% fail on Rigid brake pipes
- 0.66% fail on Service brake pedal or hand lever
  - 0.66% fail on Pedal
- 0.66% fail on Air and vacuum systems
  - 0.66% fail on Servos
- 0.66% fail on Parking brake control
  - 0.66% fail on Lever
- 0.66% fail on Hydraulic systems
  - 0.66% fail on Brake fluid
- 0.66% fail on Brake actuators (including spring brakes or hydraulic cylinders)
  - 0.66% fail on Hydraulic brake callipers
- 0.66% fail on Other components and prescribed areas
  - 0.66% fail on Prescribed areas
    - 0.66% fail on Other braking system component
- 0.66% fail on Mechanical brake components
  - 0.66% fail on Brake linings and pads
    - 0.66% fail on Brake pads
  - 0.66% fail on Brake discs and drums
    - 0.66% fail on Brake discs
7.3% fail on Body, chassis, structure
- 2.6% fail on Transmission
  - 2.0% fail on Drive shafts
    - 1.3% fail on Joints
    - 0.66% fail on Drive shaft
  - 0.66% fail on Prop shafts
    - 0.66% fail on Bearing housing
- 1.3% fail on Integral vehicle structure
  - 1.3% fail on Integral vehicle structure condition
- 1.3% fail on Chassis
  - 1.3% fail on Chassis condition
- 0.66% fail on Exhaust system
- 0.66% fail on Doors
  - 0.66% fail on Driver's door
    - 0.66% fail on Door condition
- 0.66% fail on Cabs
  - 0.66% fail on Prescribed areas
6.0% fail on Visibility
- 4.0% fail on Washers
- 2.6% fail on Wipers
- 0.66% fail on View to rear
  - 0.66% fail on Mirrors
4.6% fail on Suspension
- 2.0% fail on Wheel bearings
- 2.0% fail on Component mounting prescribed areas
- 1.3% fail on Springs
  - 1.3% fail on Coil springs
    - 1.3% fail on Coil spring
- 1.3% fail on Suspension arms
  - 0.66% fail on Pins and bushes
  - 0.66% fail on Ball joint
- 0.66% fail on Sub-frames
  - 0.66% fail on Sub-frame mounting prescribed areas
0.66% fail on Identification of the vehicle
- 0.66% fail on Registration plates
0.66% fail on Seat belts and supplementary restraint systems
- 0.66% fail on Seat belts
  - 0.66% fail on Condition
0.66% fail on Noise, emissions and leaks
- 0.66% fail on Noise suppression
  - 0.66% fail on Sound deadening material