Selling your classic car? It's FREE to list your car on Honest John Classics | No thanks

Alfa Romeo Giulia MOT Results

79.5% pass rate
from 83 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the Alfa Romeo Giulia is unusually good or bad.

  • 9.6% fail on Lamps, reflectors and electrical equipment
    • 3.6% fail on Headlamps
      • 3.6% fail on Headlamp
    • 3.6% fail on Direction indicators
      • 3.6% fail on Flashing type
        • 3.6% fail on Individual direction indicators
    • 2.4% fail on Headlamp aim
      • 2.4% fail on Headlamp aim
    • 2.4% fail on Stop lamp
    • 2.4% fail on Registration plate lamp(s)
    • 1.2% fail on Electrical equipment
      • 1.2% fail on Horn
  • 7.2% fail on Brakes
    • 7.2% fail on Brake performance
      • 3.6% fail on Service brake performance
        • 3.6% fail on Rbt
          • 3.6% fail on Service brake performance
      • 3.6% fail on Service Brake Efficiency (sp)
        • 3.6% fail on Rbt (sp)
          • 3.6% fail on Service brake imbalance
          • 2.4% fail on Service brake performance
      • 3.6% fail on Parking brake efficiency (sp)
        • 3.6% fail on Rbt (sp)
      • 1.2% fail on Brake performance not tested
      • 1.2% fail on Parking brake performance
        • 1.2% fail on Rbt
          • 1.2% fail on Parking brake performance
    • 1.2% fail on Rigid brake pipes
  • 6.0% fail on Visibility
    • 4.8% fail on Washers
    • 1.2% fail on Wipers
  • 4.8% fail on Body, chassis, structure
    • 2.4% fail on Chassis
      • 2.4% fail on Chassis condition
    • 2.4% fail on Exhaust system
    • 1.2% fail on Integral vehicle structure
      • 1.2% fail on Integral vehicle structure condition
  • 2.4% fail on Steering
    • 1.2% fail on Steering gear
      • 1.2% fail on Steering box
    • 1.2% fail on Steering linkage components
      • 1.2% fail on Track rod end
  • 2.4% fail on Suspension
    • 1.2% fail on Anti-roll bars
      • 1.2% fail on Linkage ball joints
    • 1.2% fail on Component mounting prescribed areas
  • 2.4% fail on Noise, emissions and leaks
    • 1.2% fail on Exhaust emissions
      • 1.2% fail on Spark ignition
        • 1.2% fail on Emissions not tested
    • 1.2% fail on Fluid leaks
      • 1.2% fail on Engine oil leaks
  • 1.2% fail on Identification of the vehicle
    • 1.2% fail on Registration plates
  • 1.2% fail on Speedometer and speed limiter
    • 1.2% fail on Speedometer
  • 1.2% fail on Seat belts and supplementary restraint systems
    • 1.2% fail on Seat belts
      • 1.2% fail on Prescribed areas