Selling your classic car? It's FREE to list your car on Honest John Classics | No thanks

Alfa Romeo Berlina MOT Results

75.1% pass rate
from 261 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the Alfa Romeo Berlina is unusually good or bad.

  • 15% fail on Lamps, reflectors and electrical equipment
    • 6.5% fail on Headlamps (120% worse than other pre-1990 cars)
      • 6.5% fail on Headlamp (120% worse than other pre-1990 cars)
    • 3.8% fail on Headlamp aim
      • 3.8% fail on Headlamp aim
    • 3.8% fail on Position lamps (140% worse than other pre-1990 cars)
      • 3.1% fail on Position lamp
      • 0.77% fail on All position lamps (5 times worse than other pre-1990 cars)
    • 3.8% fail on Direction indicators
      • 3.8% fail on Flashing type
        • 3.1% fail on Individual direction indicators
        • 0.77% fail on All direction indicators
        • 0.38% fail on Side repeaters
    • 2.3% fail on Electrical equipment
      • 1.5% fail on Horn
      • 0.38% fail on Electrical wiring
      • 0.38% fail on Battery(ies)
    • 1.9% fail on Stop lamp
    • 1.5% fail on Registration plate lamp(s)
  • 6.5% fail on Brakes
    • 6.1% fail on Brake performance
      • 3.8% fail on Service brake performance
        • 3.4% fail on Rbt
          • 3.4% fail on Service brake performance
        • 0.38% fail on Plate brake tester
          • 0.38% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
      • 3.1% fail on Service Brake Efficiency (sp)
        • 3.1% fail on Rbt (sp)
          • 3.1% fail on Service brake performance
          • 0.38% fail on Service brake imbalance
      • 1.1% fail on Parking brake efficiency (sp)
        • 1.1% fail on Rbt (sp)
      • 0.77% fail on Brake performance not tested
      • 0.38% fail on Parking brake performance
        • 0.38% fail on Rbt
          • 0.38% fail on Parking (secondary brake performance)
    • 1.1% fail on Service brake pedal or hand lever
      • 1.1% fail on Pedal
      • 0.38% fail on Hand lever
    • 0.38% fail on Air and vacuum systems
      • 0.38% fail on Servos
    • 0.38% fail on Parking brake control
      • 0.38% fail on Lever
    • 0.38% fail on Rigid brake pipes
    • 0.38% fail on Flexible brake hoses
    • 0.38% fail on Other components and prescribed areas
      • 0.38% fail on Prescribed areas
        • 0.38% fail on Other braking system component
  • 6.5% fail on Visibility
    • 5.0% fail on Washers
    • 1.9% fail on Wipers
    • 0.38% fail on Bonnet
  • 6.1% fail on Suspension
    • 2.7% fail on Component mounting prescribed areas
    • 1.9% fail on Suspension arms
      • 1.1% fail on Ball joint dust cover
      • 0.77% fail on Pins and bushes
      • 0.77% fail on Ball joint
    • 1.9% fail on Anti-roll bars
      • 0.77% fail on Attachment bracket and mounting (6 times worse than other pre-1990 cars)
      • 0.38% fail on Anti-roll bar
      • 0.38% fail on Pins and bushes
      • 0.38% fail on Linkage pins and bushes
    • 0.77% fail on Wheel bearings
    • 0.38% fail on Springs
      • 0.38% fail on Spring mounting prescribed areas
    • 0.38% fail on Shock absorbers
  • 5.4% fail on Noise, emissions and leaks
    • 5.0% fail on Exhaust emissions
      • 5.0% fail on Spark ignition
        • 4.6% fail on Non catalyst emissions
        • 0.38% fail on Emissions not tested
    • 0.38% fail on Fluid leaks
      • 0.38% fail on Engine oil leaks
  • 5.0% fail on Body, chassis, structure
    • 1.9% fail on Chassis
      • 1.9% fail on Chassis condition
    • 1.1% fail on Exhaust system
    • 0.77% fail on Integral vehicle structure
      • 0.77% fail on Integral vehicle structure condition
    • 0.77% fail on Fuel system
      • 0.77% fail on Fuel cap/sealing device
    • 0.38% fail on Doors
      • 0.38% fail on Driver's door
        • 0.38% fail on Door condition
    • 0.38% fail on Seats
      • 0.38% fail on Driver's seat
    • 0.38% fail on Undertray
  • 4.6% fail on Steering
    • 3.4% fail on Steering linkage components
      • 1.5% fail on Ball joint (4 times worse than other pre-1990 cars)
      • 1.1% fail on Track rod end
      • 0.38% fail on Drag link end
      • 0.38% fail on Locking devices
    • 0.77% fail on Prescribed areas (4 times worse than other pre-1990 cars)
    • 0.38% fail on Steering gear
      • 0.38% fail on Steering box
  • 1.1% fail on Identification of the vehicle
    • 1.1% fail on Registration plates
  • 0.77% fail on Seat belts and supplementary restraint systems
    • 0.77% fail on Seat belts
      • 0.38% fail on Prescribed areas
      • 0.38% fail on Condition
  • 0.38% fail on Speedometer and speed limiter
    • 0.38% fail on Speedometer
  • 0.38% fail on Tyres
    • 0.38% fail on Condition