Selling your classic car? It's FREE to list your car on Honest John Classics | No thanks

Alfa Romeo 75 MOT Results

66.7% pass rate
from 63 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the Alfa Romeo 75 is unusually good or bad.

  • 19% fail on Lamps, reflectors and electrical equipment
    • 6.3% fail on Headlamp aim
      • 6.3% fail on Headlamp aim
    • 6.3% fail on Direction indicators
      • 6.3% fail on Flashing type
        • 4.8% fail on All direction indicators (8 times worse than other pre-1990 cars)
        • 1.6% fail on Individual direction indicators
    • 3.2% fail on Hazard warning (9 times worse than other pre-1990 cars)
      • 3.2% fail on Switch (9 times worse than other pre-1990 cars)
    • 3.2% fail on Registration plate lamp(s)
    • 3.2% fail on Electrical equipment
      • 1.6% fail on Battery(ies)
      • 1.6% fail on Horn
    • 1.6% fail on Headlamps
      • 1.6% fail on Headlamp
    • 1.6% fail on Stop lamp
    • 1.6% fail on Front and rear fog lamps
      • 1.6% fail on Rear fog lamp
        • 1.6% fail on Rear fog lamp
    • 1.6% fail on Mandatory tell-tales
      • 1.6% fail on Rear fog lamp tell-tale
  • 11% fail on Brakes
    • 9.5% fail on Brake performance
      • 6.3% fail on Parking brake efficiency (sp)
        • 6.3% fail on Rbt (sp)
      • 3.2% fail on Service brake performance
        • 3.2% fail on Rbt
          • 3.2% fail on Service brake performance
      • 3.2% fail on Parking brake performance
        • 3.2% fail on Rbt
          • 1.6% fail on Parking brake performance
          • 1.6% fail on Parking (secondary brake performance)
      • 1.6% fail on Brake performance not tested
    • 3.2% fail on Rigid brake pipes
    • 1.6% fail on Service brake pedal or hand lever
      • 1.6% fail on Pedal
    • 1.6% fail on Hydraulic systems
      • 1.6% fail on Brake fluid
  • 9.5% fail on Suspension
    • 3.2% fail on Shock absorbers
    • 3.2% fail on Component mounting prescribed areas
    • 1.6% fail on Suspension arms
      • 1.6% fail on Suspension arm
    • 1.6% fail on Anti-roll bars
      • 1.6% fail on Linkage pins and bushes
  • 9.5% fail on Body, chassis, structure
    • 3.2% fail on Floor (14 times worse than other pre-1990 cars)
    • 1.6% fail on Integral vehicle structure
      • 1.6% fail on Integral vehicle structure condition
    • 1.6% fail on Chassis
      • 1.6% fail on Chassis condition
    • 1.6% fail on Exhaust system
    • 1.6% fail on Fuel system
      • 1.6% fail on Hose
    • 1.6% fail on Transmission
      • 1.6% fail on Drive shafts
        • 1.6% fail on Joints
    • 1.6% fail on Body
      • 1.6% fail on Body condition
  • 6.3% fail on Visibility
    • 4.8% fail on Washers
    • 1.6% fail on Wipers
  • 4.8% fail on Tyres
    • 3.2% fail on Tread depth
    • 1.6% fail on Condition
  • 3.2% fail on Steering
    • 1.6% fail on Steering linkage components
      • 1.6% fail on Track rod end
    • 1.6% fail on Power steering
      • 1.6% fail on Other components
  • 3.2% fail on Noise, emissions and leaks
    • 3.2% fail on Exhaust emissions
      • 3.2% fail on Spark ignition
        • 3.2% fail on Non catalyst emissions
  • 1.6% fail on Identification of the vehicle
    • 1.6% fail on Vehicle Identification Number
  • 1.6% fail on Seat belts and supplementary restraint systems
    • 1.6% fail on Seat belts
      • 1.6% fail on Prescribed areas