MOT Results

Honest John Classics MOT Results » Talbot » Alpine
Do you have a minute to answer an electric vehicle survey? Start the survey | No thanks

Talbot Alpine MOT Results

77.8% pass rate
from 63 tests in 2020
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the Talbot Alpine is unusually good or bad.

  • 11% fail on Brakes
    • 9.5% fail on Brake performance
      • 7.9% fail on Service brake performance
        • 7.9% fail on Rbt
          • 4.8% fail on Service brake performance
          • 3.2% fail on Service brake imbalance
      • 3.2% fail on Service Brake Efficiency (sp)
        • 3.2% fail on Rbt (sp)
          • 3.2% fail on Service brake imbalance
      • 1.6% fail on Parking brake performance
        • 1.6% fail on Rbt
          • 1.6% fail on Parking (secondary brake performance)
      • 1.6% fail on Parking brake efficiency (sp)
        • 1.6% fail on Rbt (sp)
    • 1.6% fail on Other components and prescribed areas
      • 1.6% fail on Other components
  • 7.9% fail on Steering
    • 4.8% fail on Steering linkage components
      • 3.2% fail on Locking devices (25 times worse than other pre-1990 cars)
      • 1.6% fail on Other components
        • 1.6% fail on Steering component
    • 3.2% fail on Steering gear
      • 3.2% fail on Steering rack
    • 1.6% fail on Steering column
  • 7.9% fail on Lamps, reflectors and electrical equipment
    • 4.8% fail on Electrical equipment
      • 3.2% fail on Battery(ies)
      • 1.6% fail on Horn
    • 3.2% fail on Direction indicators
      • 3.2% fail on Flashing type
        • 1.6% fail on Individual direction indicators
        • 1.6% fail on Switch
    • 1.6% fail on Headlamps
      • 1.6% fail on Headlamp
  • 6.3% fail on Visibility
    • 3.2% fail on Washers
    • 1.6% fail on Condition of glass
      • 1.6% fail on Windscreen
    • 1.6% fail on Wipers
  • 4.8% fail on Suspension
    • 3.2% fail on Wheel bearings
    • 3.2% fail on Component mounting prescribed areas
    • 1.6% fail on Anti-roll bars
      • 1.6% fail on Attachment bracket and mounting
  • 4.8% fail on Body, chassis, structure
    • 1.6% fail on Fuel system
      • 1.6% fail on Fuel cap/sealing device
    • 1.6% fail on Transmission
      • 1.6% fail on Drive shafts
        • 1.6% fail on Joints
    • 1.6% fail on Doors
      • 1.6% fail on Other passenger's door
        • 1.6% fail on Door condition
  • 1.6% fail on Seat belts and supplementary restraint systems
    • 1.6% fail on Seat belts
      • 1.6% fail on Condition
  • 1.6% fail on Noise, emissions and leaks
    • 1.6% fail on Exhaust emissions
      • 1.6% fail on Spark ignition
        • 1.6% fail on Non catalyst emissions
  • 1.6% fail on Tyres
    • 1.6% fail on Condition
Read the Honest John Review