Selling your classic car? It's FREE to list your car on Honest John Classics | No thanks

Rolls-Royce Silver Wraith MOT Results

80.8% pass rate
from 78 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the Rolls-Royce Silver Wraith is unusually good or bad.

  • 12% fail on Brakes
    • 12% fail on Brake performance
      • 5.1% fail on Service Brake Efficiency (sp)
        • 3.8% fail on Rbt (sp)
          • 3.8% fail on Service brake performance
        • 1.3% fail on Decelerometer (sp)
      • 5.1% fail on Parking brake efficiency (sp)
        • 3.8% fail on Rbt (sp)
        • 1.3% fail on Decelerometer (sp)
      • 2.6% fail on Parking brake performance
        • 2.6% fail on Rbt
          • 2.6% fail on Parking brake performance
      • 1.3% fail on Service brake performance
        • 1.3% fail on Rbt
          • 1.3% fail on Service brake performance
      • 1.3% fail on Brake performance not tested
    • 1.3% fail on Service brake pedal or hand lever
      • 1.3% fail on Pedal
    • 1.3% fail on Parking brake control
      • 1.3% fail on Lever
    • 1.3% fail on Rigid brake pipes
  • 7.7% fail on Visibility
    • 5.1% fail on Washers
    • 3.8% fail on Wipers
  • 7.7% fail on Lamps, reflectors and electrical equipment
    • 3.8% fail on Registration plate lamp(s)
    • 2.6% fail on Headlamps
      • 2.6% fail on Headlamp
    • 1.3% fail on Headlamp aim
      • 1.3% fail on Headlamp aim not tested
    • 1.3% fail on Stop lamp
    • 1.3% fail on Direction indicators
      • 1.3% fail on Flashing type
        • 1.3% fail on All direction indicators
    • 1.3% fail on Front and rear fog lamps
      • 1.3% fail on Rear fog lamp
        • 1.3% fail on Rear fog lamp
  • 6.4% fail on Body, chassis, structure
    • 2.6% fail on Chassis
      • 2.6% fail on Chassis condition
    • 2.6% fail on Exhaust system
    • 1.3% fail on Boot lid
      • 1.3% fail on Boot lid condition
  • 2.6% fail on Suspension
    • 1.3% fail on Springs
      • 1.3% fail on Spring mounting prescribed areas
    • 1.3% fail on Sub-frames
      • 1.3% fail on Sub-frame mounting prescribed areas
    • 1.3% fail on Other suspension component
      • 1.3% fail on Ball joint
  • 1.3% fail on Identification of the vehicle
    • 1.3% fail on Registration plates
  • 1.3% fail on Noise, emissions and leaks
    • 1.3% fail on Exhaust emissions
      • 1.3% fail on Spark ignition
        • 1.3% fail on Non catalyst emissions