Do you want the Road Tax system to change? Do you have thoughts on the potential changes to the Road Tax system? | No thanks
Porsche 912 MOT Results
76.5% pass rate
from 200 tests in 2017
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the Porsche 912 is unusually good or bad.
-
18% fail on
Lamps, Reflectors and Electrical Equipment
- 9.5% fail on Headlamp aim (120% worse than other pre-1990 cars)
-
4.5% fail on
Headlamps
- 2.5% fail on Headlamp
-
1.5% fail on
Headlamp defects which don't require an aim check on retest
(5 times worse than other pre-1990 cars)
- 1.5% fail on Main beam 'tell-tale' (5 times worse than other pre-1990 cars)
-
0.50% fail on
Headlamp defects which do require an aim check on retest
- 0.50% fail on Main beam 'tell-tale'
- 4.5% fail on Stop lamp
-
4.0% fail on
Direction indicators
-
4.0% fail on
Flashing type
- 2.0% fail on All direction indicators
- 2.0% fail on Individual lamps
-
4.0% fail on
Flashing type
-
3.5% fail on
Position lamps
- 2.0% fail on Front lamps
- 2.0% fail on Rear lamps
- 3.5% fail on Registration plate lamp
- 3.5% fail on Horn
- 3.0% fail on Battery
-
0.50% fail on
Hazard warning
- 0.50% fail on Switch
-
7.5% fail on
Brakes
-
5.5% fail on
Brake performance
- 3.0% fail on Parking brake performance
- 2.5% fail on Rear wheels
- 1.5% fail on Front wheels
- 1.5% fail on Service brake performance
-
1.5% fail on
Hydraulic systems
- 1.0% fail on Leaks
-
0.50% fail on
Components
- 0.50% fail on Reservoirs
-
1.0% fail on
Hub components
- 0.50% fail on Brake pads
- 0.50% fail on Brake calipers
- 0.50% fail on Restricted movement
-
5.5% fail on
Brake performance
-
7.5% fail on
Driver's view of the road
- 5.5% fail on Washers
- 2.0% fail on Wipers
- 1.0% fail on Mirrors
-
4.0% fail on
Exhaust, Fuel and Emissions
-
2.0% fail on
Fuel system
- 1.0% fail on Cap
- 0.50% fail on Hose
- 0.50% fail on System
- 1.5% fail on Emissions
- 0.50% fail on Exhaust system
-
2.0% fail on
Fuel system
-
2.5% fail on
Suspension
(74% better than other pre-1990 cars)
-
1.5% fail on
Prescribed areas
- 1.5% fail on Component mounting
-
0.50% fail on
Suspension arms
- 0.50% fail on Pins/bushes/ball joints
-
0.50% fail on
Wheel bearings
- 0.50% fail on Front
-
1.5% fail on
Prescribed areas
-
2.5% fail on
Body, Structure and General Items
-
2.0% fail on
Seats
- 2.0% fail on Drivers (2 times worse than other pre-1990 cars)
- 0.50% fail on Passengers
- 0.50% fail on Body condition
-
0.50% fail on
Load security
- 0.50% fail on Bootlid
-
2.0% fail on
Seats
-
1.5% fail on
Tyres
- 1.0% fail on Tread depth
- 0.50% fail on Condition
-
1.5% fail on
Registration plates and VIN
- 1.5% fail on Registration plate
-
0.50% fail on
Steering
-
0.50% fail on
Steering system
- 0.50% fail on Track rod end
-
0.50% fail on
Steering system
-
0.50% fail on
Road Wheels
- 0.50% fail on Attachment
-
0.50% fail on
Seat Belts and Supplementary Restraint Systems
-
0.50% fail on
Seat belts
- 0.50% fail on Requirements
-
0.50% fail on
Seat belts