Do you want the Road Tax system to change? Do you have thoughts on the potential changes to the Road Tax system? | No thanks
Ford F100 MOT Results
82.4% pass rate
from 125 tests in 2017
(40% better than other pre-1990 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the Ford F100 is unusually good or bad.
-
14% fail on
Lamps, Reflectors and Electrical Equipment
- 4.8% fail on Stop lamp
-
4.8% fail on
Direction indicators
-
4.8% fail on
Flashing type
- 2.4% fail on All direction indicators
- 2.4% fail on Individual lamps
- 0.80% fail on Tell tales
-
4.8% fail on
Flashing type
- 4.0% fail on Registration plate lamp
- 4.0% fail on Headlamp aim
-
3.2% fail on
Position lamps
- 1.6% fail on Rear lamps
- 0.80% fail on Front lamps
- 0.80% fail on Switch
- 3.2% fail on Horn
- 1.6% fail on Electrical wiring (6 times worse than other pre-1990 cars)
-
1.6% fail on
Headlamps
-
0.80% fail on
Headlamp defects which don't require an aim check on retest
- 0.80% fail on Main beam 'tell-tale'
- 0.80% fail on Headlamp
-
0.80% fail on
Headlamp defects which don't require an aim check on retest
- 0.80% fail on Battery
-
10% fail on
Brakes
-
10% fail on
Brake performance
- 7.2% fail on Rear wheels
- 5.6% fail on Parking brake performance
- 4.8% fail on Front wheels
- 1.6% fail on Service brake performance
- 0.80% fail on Brake performance not tested
-
0.80% fail on
Hydraulic systems
-
0.80% fail on
Components
- 0.80% fail on Pipes
- 0.80% fail on Hoses
- 0.80% fail on Leaks
-
0.80% fail on
Components
-
0.80% fail on
Air and vacuum systems
-
0.80% fail on
Components
- 0.80% fail on Servos
-
0.80% fail on
Components
-
0.80% fail on
Hub components
- 0.80% fail on Brake drums
-
10% fail on
Brake performance
-
5.6% fail on
Driver's view of the road
- 4.8% fail on Washers
- 0.80% fail on Wipers
-
4.8% fail on
Suspension
-
2.4% fail on
Axles
(6 times worse than other pre-1990 cars)
- 1.6% fail on King pins (10 times worse than other pre-1990 cars)
- 0.80% fail on Swivel joints/housing
-
1.6% fail on
Wheel bearings
- 1.6% fail on Front
-
1.6% fail on
Shock absorbers
- 1.6% fail on Condition
-
0.80% fail on
Trailing arms
- 0.80% fail on Pins/bushes/ball joints
- 0.80% fail on Attachment
- 0.80% fail on Front suspension joints
-
0.80% fail on
Prescribed areas
- 0.80% fail on Component mounting
-
2.4% fail on
Axles
(6 times worse than other pre-1990 cars)
-
2.4% fail on
Exhaust, Fuel and Emissions
-
1.6% fail on
Fuel system
- 1.6% fail on Tank (10 times worse than other pre-1990 cars)
- 0.80% fail on System
- 0.80% fail on Exhaust system
- 0.80% fail on Emissions
-
1.6% fail on
Fuel system
-
1.6% fail on
Steering
-
1.6% fail on
Steering system
- 0.80% fail on Steering box
- 0.80% fail on Drag link end
- 0.80% fail on Steering damper
-
0.80% fail on
Steering control
- 0.80% fail on Steering wheel
- 0.80% fail on Steering column
-
0.80% fail on
Steering coupling
- 0.80% fail on Universal joint
-
1.6% fail on
Steering system
-
1.6% fail on
Body, Structure and General Items
- 0.80% fail on Body security
- 0.80% fail on Body condition
-
0.80% fail on
Towbars
- 0.80% fail on Towbar
-
0.80% fail on
Seat Belts and Supplementary Restraint Systems
-
0.80% fail on
Seat belts
- 0.80% fail on Prescribed areas
-
0.80% fail on
Seat belts