Selling your classic car? It's FREE to list your car on Honest John Classics | No thanks

Austin 1100 MOT Results

74.6% pass rate
from 134 tests in 2017
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the Austin 1100 is unusually good or bad.

  • 15% fail on Lamps, Reflectors and Electrical Equipment
    • 4.5% fail on Stop lamp
    • 3.7% fail on Direction indicators
      • 3.7% fail on Flashing type
        • 2.2% fail on Individual lamps
        • 1.5% fail on All direction indicators
    • 3.0% fail on Registration plate lamp
    • 3.0% fail on Horn
    • 2.2% fail on Headlamps
      • 2.2% fail on Headlamp
      • 0.75% fail on Headlamp defects which do require an aim check on retest
        • 0.75% fail on Main beam 'tell-tale'
    • 2.2% fail on Headlamp aim
    • 1.5% fail on Position lamps
      • 0.75% fail on All position lamps
      • 0.75% fail on Rear lamps
  • 13% fail on Brakes
    • 9.0% fail on Brake performance
      • 6.0% fail on Front wheels
      • 4.5% fail on Rear wheels
      • 3.0% fail on Parking brake performance
      • 1.5% fail on Service brake performance
      • 0.75% fail on Brake imbalance
    • 3.7% fail on Hydraulic systems
      • 3.7% fail on Components
        • 2.2% fail on Hoses
        • 1.5% fail on Pipes
    • 0.75% fail on Mechanical components
      • 0.75% fail on Cable
    • 0.75% fail on Restricted movement
  • 8.2% fail on Suspension
    • 6.0% fail on Prescribed areas
      • 3.7% fail on Subframe mounting (4 times worse than other pre-1990 cars)
      • 3.0% fail on Component mounting
    • 3.0% fail on Wheel bearings
      • 2.2% fail on Front
      • 0.75% fail on Rear
    • 1.5% fail on Sub-frames
      • 0.75% fail on Condition
      • 0.75% fail on Attachment
    • 1.5% fail on Drive shafts
      • 1.5% fail on Front drive shafts
        • 1.5% fail on Constant velocity joints
    • 0.75% fail on Suspension arms
      • 0.75% fail on Pins/bushes/ball joints
    • 0.75% fail on Radius arms
      • 0.75% fail on Pins/bushes/ball joints
    • 0.75% fail on Front suspension joints
  • 3.7% fail on Driver's view of the road
    • 2.2% fail on Wipers
    • 1.5% fail on Washers
  • 3.0% fail on Body, Structure and General Items
    • 2.2% fail on Body condition
    • 0.75% fail on Engine mountings
    • 0.75% fail on Seats
      • 0.75% fail on Passengers
  • 3.0% fail on Exhaust, Fuel and Emissions
    • 1.5% fail on Exhaust system
    • 1.5% fail on Fuel system
      • 0.75% fail on Pipe
      • 0.75% fail on System
  • 2.2% fail on Seat Belts and Supplementary Restraint Systems
    • 2.2% fail on Seat belts
      • 2.2% fail on Prescribed areas
  • 1.5% fail on Tyres
    • 1.5% fail on Condition
    • 0.75% fail on Tread depth
  • 0.75% fail on Steering
    • 0.75% fail on Steering system
      • 0.75% fail on Track rod end
Read the Honest John Review