MOT Results

Honest John Classics MOT Results » Triumph » GT6
Selling your classic car? It's FREE to list your car on Honest John Classics | No thanks

Triumph GT6 MOT Results

78.8% pass rate
from 245 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the Triumph GT6 is unusually good or bad.

  • 11% fail on Lamps, reflectors and electrical equipment
    • 3.7% fail on Headlamp aim
      • 3.7% fail on Headlamp aim
    • 3.7% fail on Stop lamp
    • 2.9% fail on Headlamps
      • 2.9% fail on Headlamp
    • 2.4% fail on Direction indicators
      • 2.4% fail on Flashing type
        • 1.6% fail on Individual direction indicators
        • 0.82% fail on All direction indicators
    • 1.6% fail on Registration plate lamp(s)
    • 1.6% fail on Electrical equipment
      • 1.6% fail on Horn
    • 0.41% fail on Position lamps
      • 0.41% fail on Position lamp
  • 9.4% fail on Brakes
    • 9.0% fail on Brake performance
      • 5.7% fail on Parking brake efficiency (sp) (110% worse than other pre-1990 cars)
        • 5.7% fail on Rbt (sp) (130% worse than other pre-1990 cars)
      • 5.3% fail on Service Brake Efficiency (sp)
        • 5.3% fail on Rbt (sp)
          • 4.1% fail on Service brake imbalance
          • 3.3% fail on Service brake performance (160% worse than other pre-1990 cars)
      • 3.7% fail on Service brake performance
        • 3.7% fail on Rbt
          • 3.3% fail on Service brake performance
          • 0.41% fail on Service brake imbalance
      • 1.2% fail on Brake performance not tested
      • 1.2% fail on Parking brake performance
        • 1.2% fail on Rbt
          • 1.2% fail on Parking (secondary brake performance) (3 times worse than other pre-1990 cars)
    • 0.41% fail on Air and vacuum systems
      • 0.41% fail on Servos
    • 0.41% fail on Rigid brake pipes
    • 0.41% fail on Other components and prescribed areas
      • 0.41% fail on Prescribed areas
        • 0.41% fail on Master cylinder/servo mounting
    • 0.41% fail on Mechanical brake components
      • 0.41% fail on Brake cables, rods, levers and linkages
        • 0.41% fail on Brake slack adjuster
  • 3.7% fail on Steering
    • 2.0% fail on Steering linkage components
      • 2.0% fail on Track rod end
    • 1.2% fail on Steering gear
      • 1.2% fail on Steering rack
    • 0.41% fail on Steering wheel
    • 0.41% fail on Steering column
  • 3.7% fail on Visibility
    • 2.4% fail on Wipers
    • 1.2% fail on Washers
    • 0.41% fail on View to rear
      • 0.41% fail on Mirrors
  • 2.9% fail on Suspension (61% better than other pre-1990 cars)
    • 1.6% fail on Suspension arms
      • 0.41% fail on Attachment bracket and mounting
      • 0.41% fail on Pins and bushes
      • 0.41% fail on Ball joint
      • 0.41% fail on Ball joint dust cover
    • 1.2% fail on Wheel bearings
    • 0.82% fail on Component mounting prescribed areas
  • 2.4% fail on Body, chassis, structure (61% better than other pre-1990 cars)
    • 0.82% fail on Integral vehicle structure
      • 0.82% fail on Integral vehicle structure condition
    • 0.82% fail on Doors
      • 0.82% fail on Driver's door
        • 0.82% fail on Door condition (5 times worse than other pre-1990 cars)
    • 0.41% fail on Chassis
      • 0.41% fail on Chassis condition
    • 0.41% fail on Exhaust system
    • 0.41% fail on Fuel system
      • 0.41% fail on Fuel cap/sealing device
    • 0.41% fail on Transmission
      • 0.41% fail on Drive shafts
        • 0.41% fail on Flexible couplings
    • 0.41% fail on Seats
      • 0.41% fail on Driver's seat
  • 0.41% fail on Identification of the vehicle
    • 0.41% fail on Registration plates
  • 0.41% fail on Noise, emissions and leaks
    • 0.41% fail on Fluid leaks
      • 0.41% fail on Engine oil leaks
Read the Honest John Review