MOT Results

Honest John Classics MOT Results » Rover » 200
Selling your classic car? It's FREE to list your car on Honest John Classics | No thanks

Rover 200 MOT Results

74.8% pass rate
from 139 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the Rover 200 is unusually good or bad.

  • 10% fail on Body, chassis, structure
    • 5.8% fail on Exhaust system (2 times worse than other pre-1990 cars)
    • 3.6% fail on Transmission
      • 3.6% fail on Drive shafts (2 times worse than other pre-1990 cars)
        • 3.6% fail on Joints (2 times worse than other pre-1990 cars)
    • 1.4% fail on Chassis
      • 1.4% fail on Chassis condition
    • 0.72% fail on Integral vehicle structure
      • 0.72% fail on Integral vehicle structure condition
    • 0.72% fail on Body
      • 0.72% fail on Panel
    • 0.72% fail on Floor
    • 0.72% fail on Cabs
      • 0.72% fail on Prescribed areas
  • 9.4% fail on Brakes
    • 7.9% fail on Brake performance
      • 4.3% fail on Service Brake Efficiency (sp)
        • 4.3% fail on Rbt (sp)
          • 2.2% fail on Service brake performance
          • 2.2% fail on Service brake imbalance
      • 3.6% fail on Parking brake efficiency (sp)
        • 3.6% fail on Rbt (sp)
      • 2.9% fail on Service brake performance
        • 2.9% fail on Rbt
          • 2.9% fail on Service brake performance
      • 1.4% fail on Parking brake performance
        • 1.4% fail on Rbt
          • 1.4% fail on Parking brake performance
          • 0.72% fail on Parking (secondary brake performance)
      • 0.72% fail on Brake performance not tested
    • 1.4% fail on Mechanical brake components
      • 1.4% fail on Brake linings and pads
        • 1.4% fail on Brake pads
      • 0.72% fail on Brake discs and drums
        • 0.72% fail on Brake discs
    • 0.72% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.72% fail on Hydraulic brake cylinder
  • 6.5% fail on Suspension
    • 3.6% fail on Component mounting prescribed areas
    • 0.72% fail on Springs
      • 0.72% fail on Coil springs
        • 0.72% fail on Coil spring
    • 0.72% fail on Shock absorbers
    • 0.72% fail on Suspension arms
      • 0.72% fail on Ball joint dust cover
    • 0.72% fail on Suspension rods
      • 0.72% fail on Ball joint dust cover
    • 0.72% fail on Sub-frames
      • 0.72% fail on Sub-frame mounting prescribed areas
  • 5.8% fail on Visibility
    • 4.3% fail on Washers
    • 1.4% fail on Wipers
  • 5.0% fail on Lamps, reflectors and electrical equipment (60% better than other pre-1990 cars)
    • 1.4% fail on Front and rear fog lamps
      • 1.4% fail on Rear fog lamp
        • 1.4% fail on Rear fog lamp
    • 1.4% fail on Electrical equipment
      • 1.4% fail on Horn
    • 0.72% fail on Headlamps
      • 0.72% fail on Headlamp
    • 0.72% fail on Headlamp aim
      • 0.72% fail on Headlamp aim
    • 0.72% fail on Stop lamp
    • 0.72% fail on Registration plate lamp(s)
  • 2.9% fail on Tyres
    • 1.4% fail on Condition
    • 1.4% fail on Tread depth
  • 2.2% fail on Steering
    • 1.4% fail on Steering linkage components
      • 1.4% fail on Drag link end
    • 0.72% fail on Steering gear
      • 0.72% fail on Steering rack
  • 1.4% fail on Seat belts and supplementary restraint systems
    • 1.4% fail on Seat belts
      • 0.72% fail on Prescribed areas
      • 0.72% fail on Attachment
  • 1.4% fail on Noise, emissions and leaks
    • 1.4% fail on Exhaust emissions
      • 1.4% fail on Spark ignition
        • 0.72% fail on Non catalyst emissions
        • 0.72% fail on Catalyst emissions
Read the Honest John Review