Selling your classic car? It's FREE to list your car on Honest John Classics | No thanks

Rover 100 MOT Results

78.1% pass rate

from 146 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the Rover 100 is unusually good or bad.

8.9% fail on Brakes
- 7.5% fail on Brake performance
  - 5.5% fail on Parking brake efficiency (sp)
    - 4.8% fail on Rbt (sp)
    - 0.68% fail on Decelerometer (sp)
  - 2.7% fail on Service brake performance
    - 2.7% fail on Rbt
      - 2.1% fail on Service brake performance
      - 0.68% fail on Service brake imbalance
  - 2.1% fail on Parking brake performance
    - 2.1% fail on Rbt
      - 2.1% fail on Parking (secondary brake performance) (7 times worse than other pre-1990 cars)
  - 1.4% fail on Service Brake Efficiency (sp)
    - 1.4% fail on Rbt (sp)
      - 1.4% fail on Service brake performance
      - 0.68% fail on Service brake imbalance
  - 0.68% fail on Brake performance not tested
- 1.4% fail on Brake actuators (including spring brakes or hydraulic cylinders)
  - 0.68% fail on Hydraulic brake callipers
  - 0.68% fail on Hydraulic brake cylinder
- 0.68% fail on Rigid brake pipes
8.2% fail on Visibility
- 7.5% fail on Washers
- 0.68% fail on Wipers
6.8% fail on Lamps, reflectors and electrical equipment
- 2.1% fail on Stop lamp
- 2.1% fail on Direction indicators
  - 2.1% fail on Flashing type
    - 1.4% fail on Individual direction indicators
    - 0.68% fail on All direction indicators
- 1.4% fail on Headlamps
  - 1.4% fail on Headlamp
- 1.4% fail on Headlamp aim
  - 1.4% fail on Headlamp aim
- 0.68% fail on Registration plate lamp(s)
- 0.68% fail on Electrical equipment
  - 0.68% fail on Horn
3.4% fail on Suspension
- 1.4% fail on Springs
  - 0.68% fail on Leaf springs
    - 0.68% fail on Anchor bracket
  - 0.68% fail on Coil springs
    - 0.68% fail on Coil spring
  - 0.68% fail on Spring mounting prescribed areas
- 1.4% fail on Suspension arms
  - 1.4% fail on Pins and bushes
  - 0.68% fail on Suspension arm
- 0.68% fail on Wheel bearings
- 0.68% fail on Component mounting prescribed areas
2.7% fail on Steering
- 2.7% fail on Steering linkage components
  - 1.4% fail on Drag link end
  - 1.4% fail on Track rod end
  - 0.68% fail on Ball joint
0.68% fail on Body, chassis, structure
- 0.68% fail on Fuel system
  - 0.68% fail on Pipe
0.68% fail on Seat belts and supplementary restraint systems
- 0.68% fail on Seat belts
  - 0.68% fail on Condition
0.68% fail on Noise, emissions and leaks
- 0.68% fail on Fluid leaks
  - 0.68% fail on Engine oil leaks
0.68% fail on Tyres
- 0.68% fail on Tread depth