Selling your classic car? It's FREE to list your car on Honest John Classics | No thanks

FIAT 126 MOT Results

71.2% pass rate
from 118 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for pre-1990 cars and highlighted areas where the FIAT 126 is unusually good or bad.

  • 23% fail on Lamps, reflectors and electrical equipment (82% worse than other pre-1990 cars)
    • 9.3% fail on Electrical equipment (4 times worse than other pre-1990 cars)
      • 6.8% fail on Horn (4 times worse than other pre-1990 cars)
      • 4.2% fail on Battery(ies) (6 times worse than other pre-1990 cars)
    • 8.5% fail on Headlamps (180% worse than other pre-1990 cars)
      • 8.5% fail on Headlamp (190% worse than other pre-1990 cars)
    • 5.9% fail on Headlamp aim
      • 5.1% fail on Headlamp aim
      • 0.85% fail on Headlamp aim not tested
    • 4.2% fail on Direction indicators
      • 4.2% fail on Flashing type
        • 2.5% fail on All direction indicators (3 times worse than other pre-1990 cars)
        • 0.85% fail on Individual direction indicators
        • 0.85% fail on Switch
    • 3.4% fail on Stop lamp
    • 3.4% fail on Front and rear fog lamps
      • 3.4% fail on Rear fog lamp
        • 3.4% fail on Rear fog lamp
    • 0.85% fail on Position lamps
      • 0.85% fail on Switch
    • 0.85% fail on Registration plate lamp(s)
    • 0.85% fail on Mandatory tell-tales
      • 0.85% fail on Rear fog lamp tell-tale
  • 12% fail on Brakes
    • 8.5% fail on Brake performance
      • 5.9% fail on Service Brake Efficiency (sp)
        • 5.9% fail on Rbt (sp)
          • 3.4% fail on Service brake performance
          • 3.4% fail on Service brake imbalance
      • 5.1% fail on Service brake performance
        • 5.1% fail on Rbt
          • 3.4% fail on Service brake performance
          • 2.5% fail on Service brake imbalance
      • 4.2% fail on Parking brake efficiency (sp)
        • 4.2% fail on Rbt (sp)
    • 3.4% fail on Service brake pedal or hand lever (5 times worse than other pre-1990 cars)
      • 2.5% fail on Pedal (5 times worse than other pre-1990 cars)
      • 0.85% fail on Hand lever
    • 0.85% fail on Parking brake control
      • 0.85% fail on Lever
    • 0.85% fail on Hydraulic systems
      • 0.85% fail on Master cylinder
    • 0.85% fail on Rigid brake pipes
    • 0.85% fail on Flexible brake hoses
    • 0.85% fail on Mechanical brake components
      • 0.85% fail on Brake cables, rods, levers and linkages
        • 0.85% fail on Cable
  • 10% fail on Body, chassis, structure
    • 3.4% fail on Seats (4 times worse than other pre-1990 cars)
      • 2.5% fail on Driver's seat (4 times worse than other pre-1990 cars)
      • 2.5% fail on Passenger's seat (8 times worse than other pre-1990 cars)
    • 2.5% fail on Integral vehicle structure
      • 2.5% fail on Integral vehicle structure condition
    • 1.7% fail on Transmission
      • 1.7% fail on Drive shafts
        • 1.7% fail on Joints
    • 0.85% fail on Exhaust system
    • 0.85% fail on Fuel system
      • 0.85% fail on Fuel cap/sealing device
    • 0.85% fail on Engine mounting
      • 0.85% fail on Engine mounting condition
    • 0.85% fail on Body
      • 0.85% fail on Body condition
    • 0.85% fail on Doors
      • 0.85% fail on Front passenger's door
        • 0.85% fail on Door condition
    • 0.85% fail on Cabs
      • 0.85% fail on Prescribed areas
  • 8.5% fail on Visibility
    • 6.8% fail on Washers
    • 1.7% fail on Wipers
    • 0.85% fail on View to rear
      • 0.85% fail on Mirrors
  • 8.5% fail on Suspension
    • 3.4% fail on Component mounting prescribed areas
    • 2.5% fail on Axles (6 times worse than other pre-1990 cars)
      • 1.7% fail on King pins (17 times worse than other pre-1990 cars)
      • 0.85% fail on Swivel pins and bushes
    • 2.5% fail on Wheel bearings
    • 1.7% fail on Suspension arms
      • 1.7% fail on Attachment bracket and mounting (19 times worse than other pre-1990 cars)
    • 0.85% fail on Other suspension component
      • 0.85% fail on Attachment bracket and mounting
  • 6.8% fail on Noise, emissions and leaks
    • 6.8% fail on Exhaust emissions
      • 6.8% fail on Spark ignition
        • 5.9% fail on Non catalyst emissions
        • 0.85% fail on Emissions not tested
  • 5.1% fail on Steering
    • 2.5% fail on Steering gear
      • 2.5% fail on Steering rack
    • 1.7% fail on Steering linkage components
      • 1.7% fail on Track rod end
    • 0.85% fail on Steering play
      • 0.85% fail on Steering rack
  • 2.5% fail on Seat belts and supplementary restraint systems
    • 2.5% fail on Seat belts
      • 1.7% fail on Condition
      • 0.85% fail on Prescribed areas
      • 0.85% fail on Attachment
      • 0.85% fail on Requirements
  • 1.7% fail on Tyres
    • 0.85% fail on Condition
    • 0.85% fail on Tread depth
  • 0.85% fail on Road Wheels
    • 0.85% fail on Attachment
Read the Honest John Review